Zebra designer pro help
![zebra designer pro help zebra designer pro help](https://www.zebra.com/us/en/products/software/barcode-printers/link-os/zebradesigner-pro/_jcr_content/mainpar/herocarousel_f16/carouselItems/herocarouselitem_be8/largeImage.transform/image-full/image.png)
This is done in the same way as sending a calibrate command however, you will hold the feed button down for four flashes, rather than two. To clear out all settings and run a calibration, you can send a Factory Reset command to the printer. If you have attempted to calibrate your printer and still have issues, it is possible that the printer has some setting stored in it causing an error. If you release the button after the green light flashes twice, a few labels will feed from the printer and it will re-calibrate to your label stock. The green light will first flash once, then flash twice. To send a calibrate command to the printer, press and hold the feed button down on the printer. This is done by various “Flash Sequences” that are sent by holding the top button down for a certain amount of time. For the complete list, refer to the ZebraDesigner Pro Specifications.
#Zebra designer pro help code#
The desktop printers can be sent commands by using the top feed button. The following FAQ applies to both Zebra Designer Pro Version 1 and Version 2 Q: Can I print bar codes with ZebraDesigner Pro A: As ZebraDesigner Pro is bar code labeling software, all editions of ZebraDesigner Pro support all industrial standard linear and 2-D bar code types. You should use the feed button on top of the printer to send a calibration command to the printer:Ĭalibrating the Printer Using the Feed Button If the printer does not feed just one label, it likely needs to be re-calibrated. When a printer is properly calibrated and ready to print, the green light on top should be solid, and pressing the feed button should feed exactly one label at a time from your printer. Once you have installed your roll of labels and ribbon into your desktop printer, the printer will need to be calibrated to this new stock.
#Zebra designer pro help free#
Feel free to refer to some of the Users Guides contained on the Zebra CD. ZebraDesigner offers many basic design features for printing labels.you may insert the label template CD into your computer, click on “Open some other existing labels”, and browse to your CD drive to open the label format you have received. If you have been shipped a label template from Electronic Imaging Materials, Inc.You can start ZebraDesigner and either start a new label, or open an existing label format. ZebraDesigner and your printer are now installed.Select the port your printer is using to connect to your computer (Usually USB, sometimes LPT) and click Finish.
#Zebra designer pro help install#
![zebra designer pro help zebra designer pro help](https://i.ytimg.com/vi/3fc1kX4pMMs/maxresdefault.jpg)
If not done already, insert the “Specialty Printing Solutions” CD into your computer.Ī screen should come up allowing you to select your printer model from a dropdown list.
![zebra designer pro help zebra designer pro help](https://pcwonderland.com/wp-content/uploads/2019/01/ZebraDesigner-Pro-2.5.0-Build-9427-Free-Download-14.jpg)
ZebraDesigner Technical Support Installing and using ZebraDesigner: